SC(B)10-30～2500樹脂絕緣干式電力變壓器

箱式線圈：低壓繞組采用整段銅箱，連同F級的匝繞緣在專用低壓箱繞機上繞制，箱式線圈較好地解決了低電壓，大電流線圈繞產品短路應力大，安匝不平衡，散熱效果差，存在繞制螺旋角，人工焊接質量不穩定的突出問題。同時我公司繞組端部用樹脂灌封，固化成形，防潮防污，引線銅排經氬弧焊自動焊接。

溫控裝置:  變壓器采用BWDK系列信號溫度計，測溫元件埋設在低壓線圈上半部，可自動檢測并巡回顯示相線圈各自的工作濕度。并且有超溫報警和跳閘功能。

Box coil：low voltage winding adopts segmental copper foil,along with F grade in the low-pressure foil insulation turms on special around the system.Foil type coils has solved the low voltage,large current coil short-circuit stress around the product,Ann circle imbalance,cooling effect is poor,exist around the system spiral angel,artificially welding quality unstable outstanding problems.

At the same time company winding ends potting with resin. curing forming,moistureproof antifouling.Fuses copper platoon diameter argon arc welding automatic welding

Temperature control device: transformer USES BWDK series Temperature sensor signal thermometer,buried in the low-pressure coil,upper automatic detection and touring show phase of their respective working temperature coiI and overtemperature alarm and tripped function.

●安全、難燃防火，無污染.可直接安裝在負荷中心。

●免維護、安裝簡便、綜合運行成本低。

●防潮性能好，可在100% 濕度下正常運行，停運后不經預干燥即可投入運行。

●損耗低，局部放電量低、噪音小、散熱能力強，強迫風冷條件下可以150%額定負載運行。

●配備有完善的溫度保護控制系統，為變壓器安全運行提供可靠保障。

●可靠性高。據對已經投入運行的產品的運行研究，產品的可靠性指標已經達到國際先進水平。

●Safety fire-proof nopollution it can be directly installed in load center.

●Maintenance-free conveniently installed, low compound  running cost.

●Humidity-resistant it can normally operate bellow 100% tempreture no need predrying after stopping running and immdidtely running.

●Low loss local discharge capacity and noise，strong heatscattering capacitv，It can run With 150% rated load under the condition of forced wind-cooling

●Fitting With prefecting tempreture protection control system to supply  reliable reliable safe-guard for safe running of transformer

●High rellability.Reliablity target of products have been confirm to international advance level.